Skip to content
608 Practice Test

How EPA 608 certification works

Section 608 of the Clean Air Act makes technicians who could release refrigerant from stationary equipment pass an EPA-approved test. Here is how it works, with the source for each fact.

The test at a glance
Who needs itAnyone who maintains, services, repairs or disposes of equipment that could release refrigerant source
TypesType I small appliances, Type II high-pressure, Type III low-pressure, Universal all three source
Questions25 Core + 25 for each type you take; Universal is 100 source
Pass score70% (18 of 25) per part; mail-in Type I 84% source
Who gives the testEPA-approved certifying programs, not EPA itself source
ExpiryNever; no recertification source
Wallet cardWithin 30 days of the test source

Checked on 23 November 2026. Rules change: check your certifying program before you book.

Who has to be certified

EPA counts you as a technician if you attach and remove hoses and gauges to measure pressure, add or remove refrigerant, or do anything else that opens a refrigerant circuit. Apprentices may work without certification only while a certified technician closely and continually supervises them. Source: EPA certification requirements.

Certification also lets you buy refrigerant: sales of most refrigerants are restricted to certified technicians. Source: EPA sales restriction.

The four tests

Every test has a Core part of 25 questions plus 25 for each type: Type I (small appliances: factory-sealed, 5 pounds of refrigerant or less), Type II (high-pressure and very high-pressure appliances), Type III (low-pressure appliances such as many chillers). Universal is all four parts, 100 questions, and can be built from separate passes.

Type I can be taken in a mail-in, open-book format, but then the pass mark is 84% and it does not count toward Universal. Source: 40 CFR 82 Appendix D.

What is new for 2026

From 1 January 2026, EPA's Part 84 rules under the AIM Act add leak-repair and other requirements for appliances using HFC refrigerants and their substitutes. Questions about leak rates and repair deadlines on this site follow the current text. Source: 40 CFR Part 84 Subpart C.

How to prepare

EPA publishes the list of subject areas for each test: Section 608 test topics. Learn the Core first, because every certification needs it, then the type you work on.

Start with the free 100-question practice test, see which part is weakest, then study those topics.

Take the free 100-question practice test

Questions people ask

Can I take the EPA 608 test online?

Yes, many certifying programs offer online proctored tests. Only Type I may be taken in the mail-in, open-book format.

How much does the test cost?

Each certifying program sets its own price. EPA does not set the fee.

What happens if I fail one part?

Each part is scored on its own, so you keep the parts you passed and retake the one you failed. Ask your certifying program about its retake rules.