Skip to content
608 Practice Test

Core

EPA 608 Core: Clean Air Act, Montreal Protocol and Section 608 rules

The legal side of the Core test: the venting ban, who may buy refrigerant, which certification covers which equipment, disposal duties, phaseout dates, leak-rate triggers and penalties.

Treaty, law and phaseout dates

  • The Montreal Protocol is the world treaty that is phasing out the production and consumption of ozone-depleting substances. The United States signed it in 1987.
  • In the U.S. the phaseout is carried out under the Clean Air Act. Section 608 covers stationary refrigeration and air conditioning; motor vehicle air conditioners fall under Section 609.
  • Production and import of halons stopped on 1 January 1994, and of CFCs and the other Class I substances (except methyl bromide) on 1 January 1996.
  • From 2010, new R-22 could only be made or imported for equipment built before 1 January 2010. Since 2020 no R-22 may be produced or imported at all. All HCFCs end in 2030.

The venting ban

Nobody servicing, repairing or disposing of equipment may knowingly release refrigerant. This covers CFCs, HCFCs and non-exempt substitutes such as HFCs.

  • Letting recovered refrigerant out of a recovery cylinder is also venting.
  • Tiny losses during good-faith recovery with certified equipment and the required practices (de minimis releases) are not a violation.
  • A few substances are exempt, for example carbon dioxide, nitrogen and water in any application.
  • The 40 CFR 19.4 table lists $124,426 for the Clean Air Act penalty in 42 U.S.C. 7413(b) where penalties are assessed on or after 8 January 2025 (violations after 2 November 2015); it is adjusted for inflation.

Certification and the sales restriction

  • Type I: small appliances. Type II: medium-, high- and very high-pressure appliances. Type III: low-pressure appliances. Universal: all three.
  • Section 608 certification does not expire. Keep a copy of your certificate at your place of business until three years after you stop working as a technician.
  • Attaching hoses and gauges, adding or removing refrigerant and cutting lines are technician work. Painting a unit or tightening nuts and bolts are not.
  • An apprentice may do technician work only under close and continual supervision of a certified technician, and only for two years from registering.
  • Only certified technicians (or employers that prove they employ one) may buy ozone-depleting refrigerants or their substitutes. A Section 609 card does not allow buying refrigerant for stationary equipment.
  • Exception: small MVAC cans of 2 pounds or less with a unique fitting and a self-sealing valve may be sold to anyone.

Disposal and leak repair

  • For fridges, freezers and window units scrapped with their charge inside, the final processor (scrap yard or landfill) must make sure the refrigerant is recovered.
  • If the refrigerant was already removed, the final processor keeps a signed statement with the recoverer's name, address and the recovery date. A sticker is not enough.
  • With 50 pounds or more of ozone-depleting refrigerant, repair is required above an annual leak rate of 20% (commercial refrigeration), 30% (industrial process) or 10% (comfort cooling and others).
  • Since 1 January 2026 the same leak rates apply under 40 CFR Part 84 to appliances with 15 pounds or more of a refrigerant containing an HFC, or another substitute with a GWP above 53 (residential and light commercial AC excluded).

Common traps

  • R-22 is not legal to vent just because production has ended; the venting ban still applies.
  • HFCs do not deplete ozone, but they are still covered by the venting ban and the sales restriction.
  • A Section 609 (car AC) certificate does not let you buy stationary refrigerant, whatever the container size.
  • Certification never expires; the three-year rule is only about keeping a copy after you stop working.

Key terms

Montreal Protocol
International treaty phasing out ozone-depleting substances; signed by the U.S. in 1987.
Venting prohibition
Ban on knowingly releasing refrigerant during service, repair or disposal.
De minimis release
A very small loss during good-faith recovery that follows the rules; not a violation.
Sales restriction
Only certified technicians, or employers of one, may buy refrigerant (with narrow exceptions).
Final processor
The last link before final disposal, for example a scrap recycler or a landfill.
Leak rate
The share of the full charge an appliance would lose over 12 months at its current loss rate.

Practise all key terms with flashcards

Try 7 questions on this topic

7 free questions here; 22 on this topic with a pass.

Question 1 of 7

Clean Air Act, Montreal Protocol and Section 608 rules

During a repair on an R-22 system, a technician knowingly lets the refrigerant escape into the air instead of recovering it. Under Section 608, this is:

Clean Air Act, Montreal Protocol and Section 608 rules: questions with answers

Choose your answer first, then open "Show the answer".

  1. 1.During a repair on an R-22 system, a technician knowingly lets the refrigerant escape into the air instead of recovering it. Under Section 608, this is:

    • ALegal if the system holds less than 50 pounds
    • BIllegal venting
    • CLegal if the release takes place outdoors
    • DLegal because R-22 is no longer produced
    Show the answer

    Answer: B Illegal venting

    The venting prohibition bans knowingly releasing refrigerant during service, repair, maintenance or disposal. The size of the system and the place do not matter.

    Source: eCFR: 40 CFR 82.154, Prohibitions

  2. 2.A household freezer reaches a scrap metal yard with its refrigerant charge still inside. Who is responsible for making sure the refrigerant is recovered before final disposal?

    • AThe company that built the freezer
    • BThe original buyer only
    • CThe scrap yard (final processor)
    • DNo one, because small appliances are exempt
    Show the answer

    Answer: C The scrap yard (final processor)

    For equipment that is thrown away with its charge still inside, the last link in the chain, such as a scrap recycler or landfill, must make sure the refrigerant is recovered.

    Source: EPA: Stationary Refrigeration Safe Disposal Requirements

  3. 3.Which refrigerant sale is allowed to an uncertified buyer?

    • AA 2 lb or smaller MVAC can with a self-sealing valve
    • BA 25 lb cylinder of R-410A for a home heat pump
    • CA 30 lb cylinder of R-22 for a window air conditioner
    • DA 10 lb cylinder of R-134a for a chiller
    Show the answer

    Answer: A A 2 lb or smaller MVAC can with a self-sealing valve

    Small cans of non-exempt MVAC refrigerant, holding two pounds or less with a unique fitting and a self-sealing valve, may still be sold to uncertified people for their own vehicles.

    Source: EPA: Refrigerant Sales Restriction

  4. 4.Under Section 608, when may an uncertified apprentice connect gauges and recover refrigerant?

    • ANever; apprentices must pass the test first
    • BWhenever their employer gives written permission
    • COnly on systems holding less than 5 pounds
    • DUnder close, continual watch of a certified tech
    Show the answer

    Answer: D Under close, continual watch of a certified tech

    Apprentices are exempt from certification as long as a certified technician closely and continually supervises them. Both share responsibility for following the rules.

    Source: EPA: Types of Section 608 Technician Certification

  5. 5.From which year has production and import of HCFC-22 (R-22) been fully banned in the United States?

    • A2010
    • B2020
    • C2030
    • D1996
    Show the answer

    Answer: B 2020

    EPA's HCFC schedule ended production and import of HCFC-22 and HCFC-142b in 2020. Since 2010 R-22 could only be made for equipment built before January 1, 2010. R-22 can still be used to service existing equipment.

    Source: EPA: Phaseout of Class II Ozone-Depleting Substances

  6. 6.What does the Montreal Protocol do?

    • AIt certifies technicians in the United States
    • BIt sets the leak rates for supermarket systems
    • CIt sets the electrical safety codes for HVAC work in the U.S.
    • DIt phases out ozone-depleting substances worldwide
    Show the answer

    Answer: D It phases out ozone-depleting substances worldwide

    The Montreal Protocol is the international treaty that is gradually ending the production and consumption of ozone-depleting substances. The United States signed it in 1987.

    Source: EPA: International Actions, The Montreal Protocol

  7. 7.Which equipment is outside the Section 608 stationary refrigeration rules and handled under a separate program?

    • AMotor vehicle air conditioners
    • BHousehold refrigerators
    • CSupermarket display cases
    • DRooftop packaged air conditioners
    Show the answer

    Answer: A Motor vehicle air conditioners

    EPA's test topics describe the covered equipment as all air-conditioning and refrigeration equipment except motor vehicle air conditioners, which fall under Section 609.

    Source: EPA: Section 608 Technician Certification, Test Topics